UKDRN

Do you own or know the whereabouts of a piece of UK Drag Racing History or just want info on a particular machine.

Moderators: timetravel, ukdrn

 #40212  by shasta
 
After months of trying to locate a supply of carbon fibre cored, stainless helically wound ignition wire for the MSD ignition system fitted to the drag bike, I eventually found a source in this country. Spent a few hours replacing the leads, now 8 mm silicon, marking them up and crimping the terminals on with my new lead crimpers. All ready now for another start attempt.
Attachments
Box of goodies.
Box of goodies.
IMG_0001.JPG (2.46 MiB) Viewed 30774 times
New and old leads compared
New and old leads compared
IMG_0002.JPG (1.32 MiB) Viewed 30774 times
Printed lead numbers
Printed lead numbers
IMG_00102.JPG (2.45 MiB) Viewed 30774 times
Leads fitted with numbers and heat shrink
Leads fitted with numbers and heat shrink
IMG_0003.JPG (1.6 MiB) Viewed 30774 times
Mallory distributor fitted with new leads
Mallory distributor fitted with new leads
IMG_0004.JPG (2.43 MiB) Viewed 30774 times
Nest of vipers!
Nest of vipers!
IMG_0005.JPG (1.82 MiB) Viewed 30774 times
 #40276  by Archie King
 
shasta wrote: Tue Sep 15, 2020 8:19 pm After months of trying to locate a supply of carbon fibre cored, stainless helically wound ignition wire for the MSD ignition system fitted to the drag bike, I eventually found a source in this country. Spent a few hours replacing the leads, now 8 mm silicon, marking them up and crimping the terminals on with my new lead crimpers. All ready now for another start attempt.
What is your next modification plan for this car?
Btw, this is a clean build.
 #40277  by NitroWars
 
Archie King wrote: Thu Mar 18, 2021 3:21 am
shasta wrote: Tue Sep 15, 2020 8:19 pm After months of trying to locate a supply of carbon fibre cored, stainless helically wound ignition wire for the MSD ignition system fitted to the drag bike, I eventually found a source in this country. Spent a few hours replacing the leads, now 8 mm silicon, marking them up and crimping the terminals on with my new lead crimpers. All ready now for another start attempt.
What is your next modification plan for this car?
Btw, this is a clean build.
Car? It's a drag bike!
 #40279  by shasta
 
Well spotted, Pike!! I haven't put anything on here for ages as nothing has been done since the ignition leads. Really needs two people to attempt a start, and my usual helper, my Niece, is a matron at a major NHS hospital, so as you can guess, I haven't seen much of her ,as for some reason she's been busy!! Not happy with the fitting of the air-filters, so will be addressing that, otherwise we hope to get the bugger started and to appear at Dragstalgia running or not....