UKDRN

Do you own or know the whereabouts of a piece of UK Drag Racing History or just want info on a particular machine.

Moderators: timetravel, ukdrn

 #35595  by oily bike bloke
 
I'm trying to get a history file together for DC102, a blown Triumph bike from the 70's, and was wondering if anyone can shed some light please.

So far the only info I’m aware of is that it ran at Blackbushe in August 1975, and at Long Marston in August 1979 with Ashton Cox as the rider. No idea of builder etc.
Was told it ran in the 9s on nitro, but that’s about it.

The bike had been shed-stored for over 30 years when purchased in 2013 Fortunately the engine turned over by hand, no nasty noises emitted from the shorrock and the gears selected too!
The bike will undergo a full rebuild, with the plan to ride at VMCC Sprints and NSA meetings, using methanol.

Thanks for any help.
Attachments
UKDRN 1060077.jpg
UKDRN 1060077.jpg (138.72 KiB) Viewed 9743 times
UKDRN 1060073.jpg
UKDRN 1060073.jpg (175.74 KiB) Viewed 9743 times
 #35600  by CRR
 
I'm afraid that I can't give you a great deal of info about the bike. Ashton called the bike Wild Dream and it had a s/c 650 Triumph engine. He raced the bike several times in 1975 at Wroughton, Snetterton and Blackbushe. Don't think he drag raced it at all in 1976 but he was back in 1977 and 1978 racing at the NDRC Midlands meetings at Long Marston. I haven't been able to find any mention of him at all in any of the race reports.

I cannot find any trace of him drag racing at Santa Pod although he did enter the NSA June 1976 sprint at the Pod but he didn't finish in the top 3 in his class.
 #35602  by muddytalker
 
So far Oily I have found that Ashton raced the bike at Long Marston in 1979 at August 12th meeting where he won Bike Bracket Group D, and the Custom Fasteners Challenge Trophy meet in September and come second to Paul Eastbury in Bike Bracket Group C (Eighth mile competition).

Was entered for the 1978 17th August eighth mile meet at Long Marston. No results found.

Back tracking to 1977, Ashton was placed tenth in the NDRC Midlands John Rotherham Motorcycle Championship.

I will keep looking.
 #35603  by CRR
 
He was entered in the NSA sprint at Long Marston on the 3rd September 1978 and made runs of 12.20,12.24, 12.31, 12.26 and 12.20. That's what you call consistent!
 #39249  by oily bike bloke
 
Thought I’d ‘bump’ this thread just in case anyone else can offer any information on the history of this bike. Any info/photos gratefully received.

I must apologise for not thanking CRR and muddytalker at the time when they posted their replies, sorry chaps! :wink:

The bike’s restoration has progressed some, maybe not as fast as I’d hoped, but the front end is done, rear wheel is now a spoked items (as it was before the Suzuki cast wheel as introduced), engine has undergone a full rebuild. But that still leaves a fair few things on the to-do list.....

Ideally I’d like to do a direct replacement of the ¼ swing ball-valve that was used to cut the fuel by means of a handlebar operated lever/cable. I’ve seen similar items but ideally would like to find the same unit - anyone know where these can be found nowadays? Have seen similar/same (?) on John Hobbs’ Olympus. Thanks.

Photos of DC102 back in the day found on the web may jog a memory or two - note sure who to credit with these....... but thanks to whoever took them
Attachments
Add description
Add description
DC102 Drag bike 4 JC391 c.jpg (20.97 KiB) Viewed 8985 times
Add description
Add description
dc102 Drag bike 1.jpg (29.25 KiB) Viewed 8985 times
Add description
Add description
IMG_7809.JPG (288.89 KiB) Viewed 8985 times
Add description
Add description
IMG_7808.JPG (333.68 KiB) Viewed 8985 times
 #40415  by oily bike bloke
 
Its been a while..........................

Part way through the restoration – photos.

Original clutch with added springs to stop clutch slip, and dry fitting an NEB clutch (ex speedway).
Attachments
Original clutch with addded springs
Original clutch with addded springs
IMG_0291.JPG (212.85 KiB) Viewed 2731 times
Dry build NEB clutch
Dry build NEB clutch
IMG_0643.JPG (236.52 KiB) Viewed 2731 times
 #40417  by oily bike bloke
 
Pulling the engine revealed a lot of strengthening had been added to the cases. Someone had put a serious amount of time and effort into building the motor.
Attachments
Strengthening was impressive - Oily BB
Strengthening was impressive - Oily BB
IMG_3591.JPG (137.87 KiB) Viewed 2729 times
Strengthening was impressive - Oily BB
Strengthening was impressive - Oily BB
IMG_3586ac.jpg (195.61 KiB) Viewed 2729 times
Strengthening was impressive - Oily BB
Strengthening was impressive - Oily BB
IMG_3565.JPG (183.51 KiB) Viewed 2729 times
Strengthening was impressive - Oily BB
Strengthening was impressive - Oily BB
IMG_3558.JPG (147.9 KiB) Viewed 2729 times
 #40418  by oily bike bloke
 
Engine rebuild.

All the normal engine re-build requirements were done (sounds quick & easy writing down like this), a Morgo plunger oil pump was fitted along with a SRM oil pressure release valve, paint work (barrels) and chrome work (hold down kit) redone.

Big thanks go to Andy F for so much help and tech know how - thanks matey!

End product
Attachments
IMG_6608.JPG
IMG_6608.JPG (118.76 KiB) Viewed 2728 times